The
PowerSense™ In-Line Power Hub provides
a safe and efficient way to provide power to
VoIP Phones, Wireless LAN Access Points, Web
Cameras and other LAN Devices without the use
of an external power supply for each device.
Power is supplied over the existing LAN data
cabling system. This greatly improves the range
of installation locations for such devices,
no longer requiring them to be located near
a power outlet. It also adds an unprecedented
level of safety and reliability for powered
LAN devices.
The
PowerSense™ Hub is a 3 slot rack-mount
chassis powering up to 24 devices. A single
slot shelf mount Hub is also available. Each
8 port module is Hot-swappable and modules may
be added to the chassis without powering down
the unit. If an individual power port is damaged
due to a lightning strike or power surge, the
module bank may be hot swapped out without powering
down the chassis or disconnecting the other
devices attached to the other power ports in
the chassis.
When
used with an uninterruptible power supply, the
PowerSense™ Hub provides non-stop power
for up to 24 connected devices. PowerSense™
is tough and durable, made from an all metal
chassis. We build PowerSense™ right here
in Silicon Valley, CA using ISO 9002 manufacturing
processes. Our pledge to You is quality.
PowerSense™
operates on category 5, 5e or 6 grade LAN Data
Cable at standard Ethernet distances. The BL-6000
series supports powered devices requiring the
IEEE 802.3af Power over Ethernet Protocol or
Cisco CDP style devices when using the optional
8858-01/02 PoE Connectors.
Features/Benefits:
- Hot
swappable 8-port modules in the 19" rackmount
ready chassis support IEEE 802.3af powered
devices
- Each
module is current limited for short circuit
protection with power isolation of 1500 VRMS
- Each
module auto-detects the power requirement
for saftey and offers transparent 10/100Mb
and management operations
- Each port has TWO
diagnostic LED's as shown above
- Support
for all compliant IEEE 802.3af powered devices
- Each
module supplies full 15.4 watts for up 8 devices
as per the IEEE 802.3af standard
| Specifications: |
| Certifications |
| Safety: |
UL 1950 and cUL |
| Emissions: |
FCC
Class A EN55022 Class A EN55024, CE Mark
(CISPR 22 Class A) |
| Standards: |
P802.3af
802.3u |
| Interfaces |
|
24 Female RJ-45 Data ports
|
Shielded jacks for Category 5 or greater
UTP (two pair wire) or 100-ohm STP (two
pair wire).
Distance: 100 meters |
| 24 Female RJ45 Data+Power on Ethernet
(PoE-Power over Ethernet) ports |
Shielded jacks for Category 5 or greater
UTP (two pair wire) or 100-ohm STP (two
pair wire).
Distance: 100 meters |
| LED
Indicator/Module |
Detect/Power
Forwarding (blue) Module Power (green) |
| Electrical:
AC Power Input with
removable power cord (IEC plug) |
| Input
Voltage: |
90-264V
Autoranging (46Hz - 63Hz) |
| Connector: |
3-pin
with Ground |
| Chassis
Grounding: |
Yes |
| Power
Supply: |
Qty
3 at 150W each |
| Electrical:
DC Port Power Output |
| Power
Enabling: |
IEEE:
IEEE 802.3af |
| Power
pins: |
Unused
pairs, pins 4,5(+), 7,8(-) |
| Max.
Power/Port: |
15.4W
(BL-6500 and BL-6500GIG); 36W(BL-6500HW4) |
| Max
Power-all ports active: |
24*15.4W
(BL-6500 and BL-6500GIG); 12*36W (BL-6500HW4) |
| Module
to Module isolation: |
1500V
RMS |
| Overload
protection: |
If
Current reaches 400-450mA for 300-400 milliseconds,
the the port shuts down |
| Physical/
Mechanical |
| Chassis
type : |
19"
Rackmount w/24 Ports |
| Chassis
size : |
17.5"W
x 16.25"D x 1.75"H - 3 slot
12.0"W x 10.20"D x 1.75"H - 1 slot |
| Module
Type : |
Removable,
hot swappable |
| Weight: |
4.5lbs. (2.2kg) - 3 slot
2.8lbs. (1.3kg) - 1 slot |
| Physical/
Environmental |
| Operating
Temperature: |
0°
to 40° C ( 32° to 105° F) |
| Storage
Temperature: |
-10°
to 60° C ( 14° to 140° F) |
| Relative
Humidity: |
10%
to 90% non-condensing |
| Operating
Altitude: |
-1,000
to 10,000 feet |
| LED
Indicators/Module |
| LED
Indicators/Module |
Detect/Power
Forwarding (Blue)
Module Power (Green) |
| BL-6000
Ordering Information |
|
| Single
Port Model |
| BL-6551 |
Single
Port Model - IEEE 802.3af with removable IEC powercord |
| Chassis
only |
| BL-6224 |
3
Slot PowerSense™ Chassis - 19" Rackmout ready |
| BL-6208 |
1 Slot PowerSense™ Chassis |
| 3-Slot
Chassis - Complete w/8 port modules, up to 3 modules, 10/100 |
| BL-6524 |
24
Power & Data Ports - IEEE 802.3af |
| BL-6516 |
16
Power & Data Ports - IEEE 802.3af - w/one cover plate |
| BL-6508 |
8
Power & Data Ports - IEEE 802.3af - w/two cover plates |
| 1-Slot
Chassis - Complete with/8 port module, 1 module |
| BL-6108 |
8
Power & Data Ports - IEEE 802.3af |
| BL-6108-RM |
19"
Rackmount Kit for AX-6108 |
| 3-Slot
Chassis - Complete w/4 port High Power modules, up to 3 modules, 10/100 |
| BL-6512HW4 |
12
Power & Data Ports - IEEE 802.3af - 36 watts per port |
| BL-6508HW4 |
8
Power & Data Ports - IEEE 802.3af - 36 watts per port |
| BL-6504HW4 |
4
Power & Data Ports - IEEE 802.3af - 36 watts per port |
| 3-Slot
Chassis - Complete w/8 port Gigabit modules, up to 3 modules, 10/100/1000 |
| BL-6524GIG |
24
Power & Data Ports - IEEE 802.3af |
| BL-6516GIG |
16
Power & Data Ports - IEEE 802.3af |
| BL-6508GIG |
8
Power & Data Ports - IEEE 802.3af |
| Individual
Chassis Modules |
| BL-6500
|
IEEE
802.3af module - 8 port |
| BL-6500HW4 |
IEEE
802.3af module - 4 port High Power - 36 watts per port |
| BL-6500GIG |
IEEE
802.3af module - 8 port Gigabit support |
| Chassis
- Cover Plates for unused slots |
| BL-6201 |
Single
Slot cover plate |
| Power
over Ethernet Connectors |
| BL-8858-01 |
PoE
Connector allows a Cisco IP phone or Access point to take Power over
Ethernet from an IEEE 802.3af style Ethernet switch or Midspan power
injector. |
| BL-8858-02 |
PoE
Connector allows a Cisco IP phone or Access point to take Power over
Ethernet from an IEEE 802.3af style HP Pro Curve Ethernet switch. |
|
|
