| Condition: New
Grandstream BudgeTone 102
Lines: 1
Supported Protocols: SIP
Ports: 2 Ethernet (RJ45)
The Grandstream BudgeTone-102 (BT-102) received the Best
of Internet Telephony award at the Internet Telephony Expo in Miami for its
open standards, high quality audio and ultra low cost. The BudgeTone-102 IP telephone uses Advanced Digital Signal Processing (DSP)
and patent pending adaptive jitter buffer control to produce excellent sound quality. The BudgeTone 102
is an ideal IP phone for the home and light office use. Web
configuration makes the BT-102 a breeze to setup, the phone is easy to use and has good sound quality, but if you are looking for an enterprise class VoIP phone try the GXP-2000, a Polycom or Cisco 7900 series.
Features:
- Two RJ45 10Base-T Ethernet ports
- Support SARP/RARP, ICMP, DNS, DHCP, NTP, TFTP protocols
- Support NAT traversal via STUN & symmetric RTP
- Interoperable with various 3rd party SIP end user device, Proxy/Registrar/Server, and gateway products
- Advanced Digital Signal Processing (DSP) to ensure superb hi-fidelity audio quality
- Advanced and patent pending adaptive jitter buffer control, packet delay & loss concealment technology
- Support popular vocoders including G.723.1 (5.3K/6.3K), G.729A/B, G.711 (a-law and u-law), G.726, G.728, and wide-band G.722 (Model 102D). Dynamic negotiation of codec and voice payload length
- Support standard voice features such as Caller ID Display or Block, Call Waiting, Hold, TransfForward, FLASH, in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto dial, configurable emergency dialing (e.g., 911), early dial, click-to-dial
- Support 3-way conferencing (Model 102D), full duplex hands-fredomain acoustic echo cancellation (pending), redial, call log, volume control, voice mail with indicator, downloadable ring tone (pending)
- Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)
- Support DIGEST authentication and encryption using MD5 and MD5-sess.
- Provide easy configuration thru manual operation (phone keypad and Web interface) or personalized automated provisioning via central configuration file for mass deployment.
- Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
- NAT-friendly remote software upgrade capability (via tftp) even from behind firewalls/NATs.
- Support for fail-over SIP server and DNS server (pending)
Q. What is the difference between the BudgeTone 100, 101 & 102?
A. BudgeTone 100 refers to the product series. There are two models in the
series, the BudgeTone 101 & 102. The difference
between the 101 & 102 is the 102 has two RJ45 10Base-T
ports whereas the 101 only has one.
Grandstream BudgeTone 100 Series Comparison Chart
| Spec / Model |
BudgeTone-101 |
BudgeTone-102 |
| LAN interface |
1xRJ45 10Base-T |
2xRJ45 10Base-T |
| Phone Case |
25-button keypad
12-digit caller ID LCD |
Same as left |
Universal Switching Power
Adaptor (UL certified) |
In: 100-240V AC
Out: +5V DC, 400mA |
Same as left |
| Dimension (cm) |
18(W)x22(D)x6.5(H) |
Same as left |
| Weight |
2 lbs (0.9 kg) |
Same as left |
| Operating Temperature |
32 - 104 oF (0 - 40 oC) |
Same as left |
| Humidity |
10%-95% |
Same as left |
| Compliance |
FCC/CE/C-Tick/PSE |
Same as left |
Downloads for BudgeTone-102:
Firmware Update
Manual
Grandstream FAQ
|
