Features and Benefits
Line
Key: Using the Cisco CallManager Administration tool, the system
administrator assigns one or more DN to buttons on the Cisco Unified IP
Phone Expansion Module 7914 as desired. The line key will show the
appropriate designation.
Speed
Dial: Each button not used as a line (DN) key can be programmed as a
speed-dial key in the same manner as the Cisco Unified IP Phones 7960G,
7961G, 7970G and 7971G-GE. You can use the Cisco Unified IP Phone User
Options Web page to program a speed-dial number and label the
associated button with an appropriate name.
System Requirements
Cisco CallManager Version 3.1(2c) or later
Hardware Requirements
- Cisco Unified IP Phones 7960G (CP-7960G), 7961G (CP-7961G) , 7970G (CP-7970G) and 7971G-GE (CP-7971G-GE)
- Cisco Unified IP Phone Expansion Module 7914 (CP-7914=) (maximum of two
modules) (Connecting cable supplied with each Cisco Unified IP Phone
Expansion Module 7914)
- New footstand is required, single (CP-SINGLFOOTSTAND=) (Figure 2) or double (CP-DOUBLFOOTSTAND=) (Figure 3) as appropriate
- Power cube (CP-PWR-CUBE-3=) and cord (CP-PWR-CORD-xx=) to supply local power
Footstand
Replacement
of the standard Cisco Unified IP Phone footstand is required. The
standard footstand is replaced with a two-piece footstand specifically
designed to support the Cisco Unified IP Phone Expansion Module 7914.
Two footstands are available: a single footstand where one Cisco
Unified IP Phone Expansion Module 7914 is used and a double footstand
where two Cisco Unified IP Phone Expansion Modules 7914 are used on a
single Cisco Unified IP Phones 7960G, 7961G, 7970G or 7971G-GE.
The
only tool required for installation of the Cisco Unified IP Phone
Expansion Module 7914 is a flat blade screwdriver or other appropriate
tool to unlatch the pins securing the footstand to the Cisco Unified IP
Phones 7960G, 7961G, 7970G or 7971G-GE.