Condition: New

CyberData 010859 VoIP Loudspeaker Amplifier
AC Input for Maxium Audio Output
16 Watts Output
110v-230v Input


Product Description

The CyberData SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system. The Amplifier is designed for noisy environments such as warehouses and shop floors. It comes with a moisture-proof NEMA enclosure. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. Power-over-Ethernet (802.3af) and a wireless option are available.

If using asterisk open source IP PBX the paging server is not required.

The horn speakers have to be purchased separately.

Recommended Horn Speakers
1. Bogen SP308A
2. Moose MPI-39
3. Philmore WP20

*speakers connect via standard binding post with loud speaker wire.
**if not using the recommended speakers, the speakers used must be 8 Ohms.

The Loudspeaker Amplifier provides an easy method for implementing IP-based overhead paging systems in noisy environments such as warehouses and production areas. It is enclosed in a moisture-proof NEMA enclosure for outdoor applications.

Features

• SIP (RFC 3261) compatible
• Asterisk / trixbox compatible
• Unlimited zones (only limited by available network bandwidth)
• Hardwired 110v-230v AC input for global deployment
  
• Dual-Speed Ethernet 10/100 Mbps
• Web-based configuration
• Web-based firmware upgradeable
• Supports either one 8 ohm speaker or two 8 ohm speakers wired in parallel
• Loudspeakers must be purchased separately