Condition: New

CyberData 010860 Wireless VoIP Loudspeaker Amplifier
802.11b/g Wireless for Hard to Reach Locations
AC Input for Maxium Audio Output
16 Watts Output
110v-230v Input


Product Description

The CyberData SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system. The Amplifier is designed for noisy environments such as warehouses and shop floors. It comes with a moisture-proof NEMA enclosure. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. Power-over-Ethernet (802.3af) and a wireless option are available.

If using asterisk open source IP PBX the paging server is not required.

The horn speakers have to be purchased separately.

Recommended Horn Speakers:
1. Bogen SP308A
2. Moose MPI-39
3. Philmore WP20

*speakers connect via standard binding post with loud speaker wire.
**if not using the recommended speakers, the speakers used must be 8 Ohms.

The Loudspeaker Amplifier provides an easy method for implementing IP-based overhead paging systems in noisy environments such as warehouses and production areas. It is enclosed in a moisture-proof NEMA enclosure for outdoor applications. CyberData also offers a wireless option for hard to reach locations and an AC enhanced (non-PoE) version for maximum audio output of up to 16 Watts. The loudspeakers have to be purchased separately.

Features

• SIP (RFC 3261) compatible
• Asterisk / trixbox compatible
• Unlimited zones (only limited by available network bandwidth)
  
• Dual-Speed Ethernet 10/100 Mbps
• Web-based configuration
• Web-based firmware upgradeable
• Supports either one 8 ohm speaker or two 8 ohm speakers wired in parallel
• Loudspeakers must be purchased separately