| Condition: New
Digium Wildcard TE207P
Dual Span Selectable T1/E1/J1 With
Octasic Echo Cancellation
Ports: 2 RJ-45
Interface: PCI (5.0v only)
Product Description:
The TE207P offers an on-board DSP-based echo cancelation module. It supports E1,
T1, and J1 environments and is selectable on a per-card or per-port basis.
The TE207P is a bundling of the Digium TE205P product with the new VPM450M
Octasic DSP-based echo cancelation module. The TE207P is Digium's and the
industry's first two-port digital card featuring hardware-based echo cancelation.
The new module enables users to eliminate echo tails up to 128ms or 1024 taps
across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this
module takes advantage of the Octasic Voice Quality Enhancement to provide
superior sound quality on all calls.
Digium has designed the TE207P to be fully compatible with existing software
applications and it is fully integrated with the Asterisk Open Source PBX/IVR
platform. Also, the open source driver supports an API interface for custom
application development. With the combination of Digium Hardware and Asterisk
software, numerous combinations of telephony configurations are possible. From
the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a
new generation of worldwide communications.
The TE207P supports industry standard telephony and data protocols, including
Primary Rate ISDN (both N. American and Standard Euro) protocol families for
voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and
trunk-side interfaces are supported, also included are advanced call features.
The TE207P is for use only with a 5.0 volt PCI slot.
Data Modes:
- Cisco HDLC
- HDLC
- PPP
- Multilink PPP
- Frame Relay
Voice Modes:
- PRI CPE & PRI NET
- NI1
- NI2
- EuroISDN
- 4ESS (AT&T)
- 5ESS (Lucent)
- DMS100
- E&M
- Wink
- Feature Group B
- Feature Group D
- FXO & FXS
- Ground Start
- Loop Start
- Loop Start with Disconnect Detect
|
