Condition: New

Digium Wildcard TE406P
Quad Span Selectable T1/E1/J1 With Echo Cancellation
Ports: 4 Ethernet
Interface: PCI (5.0v only)


Product Description

The TE406P is the next generation of Digium hardware that offers an on-board echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.

The echo cancellation module supports all T1, E1, and J1 channels and improves voice quality in environments where software echo cancellation is not sufficient. The TE411P reduces CPU overhead required for software echo cancellation thereby, freeing resources for other processes, such as codec translation. By supporting 16ms with 128 channels or 64ms on 32 channels this card will perform in the most difficult of environments.

The TE406P supports a 5v PCI slot only - typically available on older motherboards and in 32-bit PCI bus architectures. The TE411P supports a 3.3v, 64-bit PCI slot.

Data Modes:

• Cisco HDLC
• HDLC
• PPP
• Multilink PPP
• Frame Relay

Voice Modes:

• PRI CPE & PRI NET
    - NI1
    - NI2
    - EuroISDN
    - 4ESS (AT&T)
    - 5ESS (Lucent)
    - DMS100
   
• E&M
    - Wink
    - Feature Group B
    - Feature Group D
   
• FXO & FXS
    - Ground Start
    - Loop Start
    - Loop Start with Disconnect Detect

Will the Wildcard TE406P fit into my PCI slot?

Compatibility Notes

Data Sheet