Condition: New

Digium Wildcard TE410P
Quad Span Selectable T1/E1/J1
Ports: 4 RJ-45
Interface: PCI (3.3v only)


Product Description:

The TE410P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

The TE410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE410P supports a 3.3v PCI slot only - typically available on newer motherboards and in 64-bit PCI bus architectures. The TE405P is for use only with a 5.0 volt PCI slot.

Data Modes:

• Cisco HDLC
• HDLC
• PPP
• Multilink PPP
• Frame Relay

Voice Modes:

• PRI CPE & PRI NET
    - NI1
    - NI2
    - EuroISDN
    - 4ESS (AT&T)
    - 5ESS (Lucent)
    - DMS100
   
• E&M
    - Wink
    - Feature Group B
    - Feature Group D
   
• FXO & FXS
    - Ground Start
    - Loop Start
    - Loop Start with Disconnect Detect

Will the Wildcard TE410P fit into my PCI slot?

Compatibility Notes

Data Sheet