Condition: New
Dialogic Diva V-2PRI-T1-48 Media Board
Tight Intergration with Microsoft Operating Systems - Windows 2000, Windows XP, Windows NT
Support for Diva Servers - API (CAPI 2.0), TAPI and Diva Server SDK
Upgradable - Free software downloads from Eicon
Product Description:
Eicon Networks’ Dialogic Diva V 2PRI T1 48 boards are extremely
powerful, PC-based telephony adapters that provide high quality media
processing capabilities for up to 60 voice channels over T1 or ISDN PRI
interface. It is the perfect choice for enterprises and service
providers looking for a large size voice, speech and conferencing
platform that can seamlessly be expanded to multiple adapters per system.
Powerful Digital Signal Processors (DSP) – one dedicated to each
communication channel, ensures real-time voice processing reducing
latency and optimizes overall system performance. Thus Diva Server
V-PRI/T1 enables both legacy and IP-based computer telephony (CTI)
solutions, as well as cutting edge voice business applications, such
as; voice portals and speech-enabled contact centers. Features
- Active server adapters, supporting up to 60 simultaneous calls on one PRI or T1 line
- Scalable solution for growing applications
- High-speed processor and on-board DSPs ensure high performance, offloading server processing
- Available in different versions for individual needs
- Support for Diva Server API (CAPI 2.0), TAPI and Diva Server SDK
- Powerful support for fax server, unified messaging, CTI server and VoIP gateway with third party software
- Tightly integrated with Windows Serve 2003, 2000, Windows XP, Windows NT
- Full Linux and Netware support
- Ease of installation guaranteed by Plug and Play conformance
- Easy upgrade with free software downloads from Eicon
- SecurID Ready Partner
- 5-year warranty
Dialogic Diva Media Boards Offload Work from CPU Along
with providing a connection to the PSTN, Diva Media Boards detect DTMF,
MF, and PULSE signals, and recognize and generate fax, modem, busy
signals, dial tones, and other intrusion tones – on the DSPs included
on the Diva Media Boards. This can allow CPU-intensive, low-level
tone-related telephony processing to be offloaded from the Asterisk’s
host CPU to the DSPs.
The Diva Media Boards also support a G.168
Echo Canceller (EC) with a 128 ms tail length (256ms on the 2 and 4
spanT1/E1 boards) – again on their DSPs. Echo cancellation impacts
Automatic Speech Recognition (ASR), Interactive Voice Response (IVR),
normal conversation, and conferencing – all cases in which echo can be
unacceptably intrusive.
Conferencing Diva
Media Boards can enable high-quality conferencing for up to 120 active
speakers in one conference onboard, without CPU load. Conferencing is
handled on DSPs and can span several Diva Media Boards using
cross-board conferencing resources via Direct Memory Access (DMA) on
the PCI bus.
Cross-board conferencing and cross-board switching
are available between different types of Diva Media Boards (analog,
E1/T1, and BRI), maintaining high quality interconnected lines. Fax and
modem connections forwarded via a Diva Media Board are of comparably
high quality.Diva Media Boards offer a variety of additional
conferencing features, including Automatic Gain Control (AGC) and
Active Speaker Recognition. (AGC is also useful when recording voice
streams, providing all recordings with the same volume level.) DTMF
clamping, which removes DTMF tones from the voice stream, can help
improve the audio signal during a conference and avoid unnecessary tone
processing.
Diva Media Boards include a Part.168 Audio Signal
Limiter to keep loud signals from disturbing the other participants in
a conference. This signal limiter is also implemented on the board’s
DSPs, not an Asterisk server’s CPU.
Other Techniques Conserve CPU Resources Diva
Media Boards provide other techniques for conserving CPU resources if
used with an Asterisk IP-PBX. For example, since Asterisk servers
handle each voice channel as a separate thread, the number of threads
that need to be managed bythe CPU and operating system during
concurrent calls can be very high. The architecture of Diva Media
Boards and their rich processing tools can address this limitation.
VoIP Support The
DSPs on the Diva Media Boards can generate RTP streams that can enable
an Asterisk server to drive many types of VoIP devices, such as SIP
phones, without requiring an expensive multi-CPU system to do
resource-consuming calculations.
Protocol Independence for Asterisk If
it incorporates Diva Media Boards, an Asterisk system is
protocol-independent. Each Diva Media Board used in a system can run
its own signaling protocol (QSIG, 5ESS, or others) because the Diva
Media Board software (CAPI and SDK) provides abstraction, allowing
protocol independence and a mix of signaling protocols in one Asterisk
server.
The following signaling protocols are supported (as of
March 2008): QSIG, Path Replacement Invite, Path Replacement Forward,
Path Replacement, Two B-Channel call transfer, Single Step Call
Transfer, Blind Call Transfer, and Calling/Called Names.
Diva
Media Boards also support SS7 Signaling Protocols, allowing the option
of connecting an Asterisk-based PBX directly to an SS7 network.
Additional Features
Diva Media Boards support a broad range of additional features that include:
• Rich Hunt Group Mode support, which is transparent to Asterisk • Automatic detection of the QSIG dialect in use (ISO, ECMA, vendor specific extensions, and others) • Emulation of Supplementary Services, even when calls are connected via different Diva Media Boards. Cross-board emulation is automatically handled via call tromboning (Line Interconnect) and/or Cross Board Switching and is transparent to Asterisk. Network- or vendor-specific supplementary services are also made available to Asterisk. • Explicit Call Transfer (ECT) emulation for independent network connection. For example, calls to QSIG and 5ESS lines can be handled even if the callers are on different lines. In QSIG networks, ECT emulation uses completion path replacement and completion notification to release local resources. • Support for different “message waiting” procedures
Technical Specifications
Diva
Media Boards can provide rich voice and other functionality if
implemented in an Asterisk server, as well as to other applications
running on the same server, including RAS servers, Fax servers, POS
servers, and other services related to phone lines. Up to eight Diva
Media Boards supporting up to 480 channels can be combined in a single
server and used with Asterisk. Consult the individual datasheet for
each Diva Media Board for additional information about specific
features, including certification:
• Dialogic Diva Analog-2 Media Board • Dialogic Diva Analog-4 Media Board • Dialogic Diva Analog-8 Media Board • Dialogic Diva BRI-2 Media Board • Dialogic Diva 4BRI-8 Media Board • Dialogic Diva PRI/E1/T1-8 Media Board • Dialogic Diva PRI/T1-24 Media Board • Dialogic Diva PRI/E1-30 Media Board • Dialogic Diva V-PRI/T1-24 Media Board • Dialogic Diva V-PRI/E1-30 Media Board • Dialogic Diva V-2PRI/T1-48 Media Board • Dialogic Diva V-4PRI/T1-96 Media Board • Dialogic Diva V-2PRI/E1-60 Media Board • Dialogic Diva V-4PRI/E1-120 Media Board |