| Condition: New
Grandstream HandyTone-386
Dual FXS Port Analog Adapter
Supported Protocols: SIP
Product Description
The Grandstream HandyTone-386 (ATA-386) is an
award-winning next generation VoIP analog telephone adaptor based on industry
open standards. The ATA-386 has two FXS (RJ11) ports and one Ethernet port
which allow you to connect two analog telephones or fax machines to an Ethernet network.
The ATA-386 can be configured through a simple web interface or through
an attached analog phone keypad and voice prompt. Additionally the ATA-386 can be
can be configured via a central configuration
file which simlifies mass deployments. The HandyTone-386 uses powerful
Digital Signal Processing (DSP), advanced adaptive jitter control and
packet loss concealment technology to ensure
the highest sound quality. Reduce the cost of deploying your Voice over IP
network by protecting legacy equipment and simplifying the
installation process with the ATA-386.
Product Features
Single RJ45 WAN Port
Dual FXS RJ11 Ports
Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS,
DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc.Supports two SIP
accounts via dual FXS portsSmall, portable design (wallet sized) and
lightweight, great for travelers.Uses powerful digital signal processing (DSP),
advanced adaptive jitter control and packet loss concealment technology
to ensure superb audio qualitySupport many vocoders including G.711 (a-law and
u-law), G.723.1 (5.3K/6.3K), G.726 (40K/32K/24K/16K), as well as G.728,
G.729A/B, and iLBC.Supports Caller ID/Name display or block, Hold, Call
Waiting/Flash, Call Transfer, Call Forward, Call Waiting Caller ID, in-band and
out-of-band
DTMF, Dial Plans, etc.Fax pass through and T.38 support
Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort
Noise Generation), Line Echo Cancellation (G.168),
and AGC (Automatic Gain
Control)Support standard encryption and authentication (DIGEST using MD5 and
MD5-sess)Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS,
DiffServ, MPLS)Supports automated NAT traversal without manual manipulation
of firewall/NATUpgrade firmaware via TFTP or HTTP (pending) with
encrypted configuration files.
Grandstream HandyTone Comparison Chart
| Features
|
ATA-286 |
ATA-386 |
ATA-486 |
ATA-488 |
ATA-496 |
| Ethernet Ports |
1 RJ45
(LAN) |
1 RJ45
(LAN) |
2 RJ45
(LAN/WAN) |
2 RJ45
(LAN/WAN) |
2 RJ45
(LAN/WAN) |
| DHCP/NAT/Router |
No |
No |
Yes |
Yes |
Yes |
| FXS Port |
1 |
2 |
1 |
1 |
2 |
| FXO Port |
No |
No |
No |
Yes |
No |
| PSTN Pass-through Port |
No |
Yes |
Yes |
Yes |
No |
| Remote Configuration |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
Click here to download the latest HandyTone 386 firmware
Click here to download the HandyTone 386 Manual
Click here for the Grandstream FAQ
|
