| THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER. THE DIRECT REPLACEMENT IS THE GRANDSTREAM HANDYTONE-503
Grandstream HandyTone-486 VoIP Adapter
Ports: 1 LAN + 1 WAN + 1 FXS
Includes Built In NAT Router
Supported Protocols: SIP
Product Description
The ATA-486 has one FXS (RJ11) port and two Ethernet ports
which allow you to connect an analog telephone or fax machine and a PC to an Ethernet network.
The Grandstream HandyTone-486 (ATA-486) is an
award-winning next generation VoIP adapter based on industry
open standards.ATA-486 has a built in router, DHCP server, NAT and supports
DMZ and gateway port forwarding. It can be configured through a simple web
interface, through an attached analog phone keypad and voice prompt or can be
can be configured via a central configuration
file which simplifies mass deployments. The HandyTone-486 uses powerful
Digital Signal Processing (DSP), advanced adaptive jitter control and
packet loss concealment technology to ensure
the highest sound quality. the ATA-486 reduces the cost of deploying your Voice over IP
network by simplifying the
installation process and protecting your investment in analog equipment.
Product Features:
Single FXS port (RJ11)Two Ethernet Ports (RJ45)SIP 2.0(RFC 3261),
TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server),
NTP, PPPoE, STUN, TFTP, etc.Gateway and DMZ port forwarding, has a built in
router and NAT.
Can also be configured to function as a bridge (with disabled NAT and DHCP)
Powerful digital signal processing (DSP) to ensure superb audio quality;
advanced adaptive jitter control and packet loss concealment technology
Support many codecs including G.711 (PCM a-law and u-law), G.723.1 (5.3K/6.3K),
G.726 (40K/32K/24K/16K), as well as G.728, G.729 and iLBC.Support Caller
ID/name display or block, Call waiting caller ID, Hold, Call Waiting/Flash, Call
Transfer, Call Forward, in-band
and out-of-band DTMF, Dial Plans, etc.
Support fax pass through (for PCMU and PCMA) and T.38 FoIP (Fax over IP).
Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise
Generation), Line Echo Cancellation (G.168), and
AGC (Automatic Gain Control)
Layer 2 support (VLAN's 802.1Q, 802.1p) and Layer 3 support for QoS (ToS, MPLS,
DiffServ)Supports automated NAT traversal (no need to manually manipulate
firewall/NATSupports authentication (DIGEST using MD5 and MD5-sess) and
standard encryptionSupport device configuration via built-in IVR, Web
browser or Central configuration files through TFTP or HTTP serverSupport
firmware upgrade via TFTP or HTTP with encrypted configuration files.Support
PSTN pass through, be able to make and receive VoIP or PSTN calls using same
connected analogue phone.Compact lightweight form factor (wallet size),
ideal for road warriors.
Grandstream HandyTone Comparison Chart
| Features
|
ATA-286 |
ATA-386 |
ATA-486 |
ATA-488 |
ATA-496 |
| Ethernet Ports |
1 RJ45
(LAN) |
1 RJ45
(LAN) |
2 RJ45
(LAN/WAN) |
2 RJ45
(LAN/WAN) |
2 RJ45
(LAN/WAN) |
| DHCP/NAT/Router |
No |
No |
Yes |
Yes |
Yes |
| FXS Port |
1 |
2 |
1 |
1 |
2 |
| FXO Port |
No |
No |
No |
Yes |
No |
| PSTN Pass-through Port |
No |
Yes |
Yes |
Yes |
No |
| Remote Configuration |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
TFTP/HTTP |
Click here to download the latest HandyTone
486 firmware
Click here to download the HandyTone 486 Manual
Click here for the Grandstream FAQ
Bookmark this HandyTone 486 page! (Ctrl+D)Bookmark this HandyTone 486 page! (Ctrl+D)Bookmark this HandyTone 486 page! (Ctrl+D)Bookmark this HandyTone 486 page! (Ctrl+D)
|
