Condition: New

Linksys PAP2-NA VoIP Adapter
Supported Protocols: SIP
Status: Unlocked
Ports: 2 FXS + 1 Ethernet

*This device is not compatible with Vonage

*The PAP2 has been upgraded by Linksys to the PAP2T, all orders for the PAP2 will be shipped the replacement model.

PAP2 -NA Product Description

The Linksys PAP2-NA Phone Adapter enables high-quality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With an appropriate Internet telephone service provider, you'll get clear telephone reception and reliable fax connections, even while using the Internet at the same time for normal data operations.


PAP2-NA Product Features

• Enables feature-rich telephone service over your cable or DSL Internet connection
• Two standard telephone jacks for your phones or fax machines, with independent phone numbers
• High quality, clear sounding voice service simultaneous with Internet use
• Compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc.

With Internet telephony, along with low domestic and international phone rates, an impressive array of special phone features are available. Choose your preferred free local dialing US area code, regardless of where you live. Or add a virtual phone number in any area code, forwarded to your Internet phone. You can even add a toll-free number. The Linksys Phone Adapter is compatible with these and all of the other special telephone features that are available from your telephone service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, etc.

Let the Linksys Phone Adapter turn your existing Internet connection into a high-quality high-value telephone service.

• Phone Adapter
• Power Adapter
• User Guide on CD-ROM
• Network Cable
• Quick Installation

• The PAP2 has two voice ports (RJ-11) for analog phones or fax machines with two independent telephone numbers
• The PAP2 has one RJ-45 port for 10Base-T Ethernet connection
• The PAP2 supports Dynamic Host Configuration Protocol (DHCP)
• The PAP2 supports Session Initiation Protocol (SIP)
• The PAP2 supports multiple voice compression G.711, G.726, G.729, and G.723.1
• Web-based configuration through a built-in web server
• Telephone key pad configuration via voice prompts
• Supports DTMF tone detection and generation
• Supports FSK Caller ID, DTMF Caller ID and FSK VMWI
• Support echo cancellation and Voice Activity Detection (VAD)
• Password protected access and configuration
• Supports auto-provisioning with remote firmware upgrade

Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)

Ports One 10/100 RJ-45 Network Port, Two Standard Phone Ports, One Power Port

Cabling Type RJ-45 Ethernet Category 5, RJ-11 Standard Phone Cable

LEDs Power, Ethernet, Phone1, Phone2

Voice Protocol Session Initiation Protocol (SIP v2)

Voice Codecs G.711 a-law, G.711μ-law, G.726, G.729 A, G.723.1

Ringer Equivalence Number (REN) 5 REN per RJ-11 port

Ring Frequency 10 Hz - 40 Hz

FXS Port Impedance Eight Configurable Setting Including North America 600 ohms, European CTR21

Ring Voltage 60 - 90 Vrms Configurable

Security Features Password-Protected Administration