| Condition: New
Linksys POES5 Power
Over Ethernet (POE) Splitter
For
Most Linksys SPA VoIP Devices
Product Description
The Linksys 5 Volt Power Over Ethernet (POES5) Splitter lets you put your
Linksys IP Phones almost anywhere, by removing the requirement of nearby power
outlets. The POES5 sends power and VoIP over one Category 5 cable to your
Linksys IP Phone. When it's time to add or relocate a phone, the POES5 can
simplify your installation.
The POES5 provides an 802.3af PoE port for connection back to a PoE switch. The
compact POES5 connects to the standard DC power input and RJ45 Ethernet port on
the Linksys IP Phone (or other supported Linksys VoIP product) via two “split”
cables. The POES5 can be then tucked away and concealed in the stand attached to
the Linksys IP phone. Simplify your installation and place your Linksys IP
Phones, or any of the other supported Linksys VoIP products in a preferred spot
with the Linksys 5 Volt Power Over Ethernet (POES5) Splitter.
Operates With
- SPA-901 IP Phone
- SPA-921 IP Phone
- SPA-941 IP Phone
- SPA-1001 Analog Telephone Adapter
- SPA-2000 Analog Telephone Adapter
- SPA-2002 Analog Telephone Adapter
- PAP2-NA Analog Telephone Adapter
- PAP2T-NA Analog Telephone Adapter
- SPA-2100 Analog Telephone Adapter
- SPA-2102 Analog Telephone Adapter
- SPA-3000 Analog Telephone Adapter
- SPA-3102 Analog Telephone Adapter
- SPA-9000 IP PBX System
Features
- Simplifies your Linksys IP Phone installation by combining power and VoIP onto one cable
- Works with a standard Category 5 Ethernet cable
- Easy-to-install, no tools, no software
- Complies with IEEE 802.3, 802.3u, 802.3af
- Green LED light indicating available power
- Designed to fit into the Linksys IP Phone stand (or optional mounting bracket-MB100)
Package Contents
- 5 Volt Power Over Ethernet Splitter
- Quick Installation Guide
Specications
Standards: IEEE 802.3 10BaseT, 802.3u 100BaseTX, 802.3af
Ports: One RJ45 Ethernet Port
Cabling Type: One combo-power/Ethernet cable attached to the device with DC
power jack and RJ45 Ethernet connector
LED: 5V Power
Connector Type: One combo-power/Ethernet cable attached to the device with DC
power jack and RJ45 Ethernet connector
Dimensions: 3.15" x 0.87" x 2.20" (80 mm x 22 mm x 56 mm)
Weight: 2.68 oz. (0.76 kg)
Power:
- Output Voltage Accuracy +- 2.0% Mac
- Output Max Current 5V: 2A
- Output Min Current 100mA
- Input Voltage 36 ~ 57 VDC
Certification: FCC, CE
Operating Temp.: 0° C to 45° C (32° F to 113° F)
Storage Temp.: -20° C to 70° C (-4° F to 158° F)
Operating Humidity: 10% to 85% Non-Condensing
Storage Humidity: 5% to 90% Non-Condensing
|
