| Condition: New
Linksys SPA901 IP Phone
1 Line (2 Line Appearances)
1 Ethernet Port (RJ45)
Supported Protocols: SIP
Wall Mountable
MFRG Part Number: SPA901-NA (Unlocked)
Linksys SPA901 Product Description
Sturdy, wall mountable, entry level IP phone perfect for residential use, hallways, break rooms and warehouses.
The Linksys SPA901 is the entry level phone for the Linksys SPA series IP phones. It is wall mountable and is commonly used for residences, break rooms or other common areas where low call volume is anticipated. The SPA901 sold by Voiplink.com is the unlocked version meaning it can be used with any service provider or PBX that supports the phone. The SPA901 is a single line phone but can have two call appearances so if someone calls while the phone is being used a call waiting tone will be played.
The SPA901 is wall mountable and can easily be fixed to sheet rock or dry wall surfaces. The SPA901 is a well built phone at a reasonable price. Because it is built by Linksys you can be assured that it has a good build quality and quality internal parts.
Because it uses the Session Initiation Protocol (SIP), the SPA901 is compatible with many leading voice over IP PBX's and is popular among the Asterisk Open Source IP PBX community.
The SPA901 has hundreds of features and settings that allow it to be used effectively by traditional businesses with the additional flexibility of voice over IP telephone. Moving the handset from location to location is a breeze, and shared line appearances (across local and geographically dispersed locations) are just some of the many advantages of the Linksys SPA901 IP Phone.
- Small, affordable, single line business class IP Phone
- Connect directly to an Internet telephone service provider or connect to an IP PBX
- Wall mount or table top phone
- Easy installation with secure remote provisioning. Menu based and web based configuration.
Provisioning and Managing the Linksys SPA901
The SPA901 can employ data encryption protocols that provide secure remote provisioning and firmware updates. Linksys secure remote provisioning tools include detailed performance measurement and troubleshooting features, enabling network providers to deliver high quality support to their subscribers. Remote provisioning also saves service providers the hassle and expense of managing, pre-loading, and re-configuring customer premise equipment (CPE).
Package Contents- SPA901 IP Phone and Handset
- Handset Cord - 56 cm (26 in)
- 5v Power Adapter - 1.8 m (6 ft) Cord
- RJ45 Ethernet Cable - 1.8 m (6 ft) Cord
- Quick Installation Guide
Telephony Features
- One Service Provider Line
- Two Call Appearances Accessed Via Flash Key or Hook-Flash
- Shared Line Appearance **
- Line Status Indicator
- Call Hold
- Music on Hold **
- Call Waiting
- Outbound Caller ID Blocking
- Call Transfer - Attended and Blind
- Three Way Conferencing with Local Mixing
- Multi-Party Call Conferencing via External Conference Bridge **
- Call Pick Up - Selective and Group **
- Call Park and UnPark **
- Call Back on Busy
- Call Blocking - Anonymous and Selective
- Call Forwarding - Unconditional, No Answer, On Busy
- Call Return - Redial Last Caller
- Hot Line and Warm Line Automatic Calling
- Call Logs (60 entries each): Made, Answered, and Missed Calls. Accessed via HTTP Server.
- Redial Last Called Number
- Do Not Disturb (callers hear line busy tone)
- Block Anonymous Incoming Calls
- URI (IP) Dialing Support (Vanity Numbers)
- Built-in Web Server for Administration and Configuration, with User and Admin Access Levels
- Built-in Interactive Voice Response system to check status and change configuration
- Date and Time with Intelligent Daylight Savings Support
- Call Start Time Stored in Call Logs
- Distinctive Ringing
- Ten User Downloadable Ring Tones - Ring Tone Generator Free from www.linksys.com
- Speed Dial (8 entries)
- Group Paging (outbound only) **
- Intercom (outbound only) **
- Set Preferred CODEC, Per Call, All Calls
- Configurable Dial/Numbering Plan Support
- Ringer and Handset Volume Controls
- Handset Input Gain Adjustment
- DNS SRV and Multiple A Records for Proxy Lookup and Proxy Redundancy
- Syslog, Debug, Report Generation, and Event Logging
- Secure Call Encrypted Voice Communication Support
- NAT Traversal
- Automated Provisioning, Multiple Methods. Up to 256 Bit Encryption: (HTTP, HTTPS, TFTP)
- Support Linksys Voice System Automatic Configuration
- Optionally Require Admin Password to Reset Unit to factory defaults
Hardware
- Voice Mail Message Waiting Indicator Light
- Redial Button
- Dedicated Flash Button
- Volume Control Button Cycles Through Volume Levels. Controls Ringer and Handset Volume.
- Standard 12-Button Dialing Pad
- High Quality Handset and Cradle
- Ethernet LAN 10BaseT RJ-45
- 5 volt DC Universal (100-240 Volt) Switching Power Adaptor
Data Networking- MAC Address (IEEE 802.3)
- IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
- ARP - Address Resolution Protocol
- DNS - A Record (RFC 1706), SRV Record (RFC 2782)
- DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
- ICMP - Internet Control Message Protocol (RFC792)
- TCP - Transmission Control Protocol (RFC793)
- UDP - User Datagram Protocol (RFC768)
- RTP - Real Time Protocol (RFC 1889) (RFC 1890)
- RTCP - Real Time Control Protocol (RFC 1889)
- DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
- VLAN Tagging 802.1p/q - Layer 2 QoS
- SNTP - Simple Network Time Protocol (RFC 2030)
** Feature requires support by call server
Voice Gateway
- SIPv2 - Session Initiation Protocol Version 2 (RFC 3261, 3262, 3263, 3264)
- SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
- Re-registration with Primary SIP Proxy Server
- SIP Support in Network Address Translation Networks - NAT (including STUN)
- SIPFrag (RFC 3420)
- Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
- Codec Name Assignment
- Voice Algorithms:
- - G.711 (A-law and mμ-law)
- - G.726 (16/24/32/40 kbps)
- - G.729 A
- - G.723.1 (6.3 kbps, 5.3 kbps)
- Dynamic Payload Support
- Adjustable Audio Frames Per Packet
- DTMF: In-band and Out-of-Band (RFC 2833) (SIP INFO)
- Flexible Dial Plan Support with Inter-Digit Timers
- IP Address / URI Dialing Support
- Call Progress Tone Generation
- Jitter Buffer - Adaptive
- Frame Loss Concealment
- VAD - Voice Activity Detection with Silence Suppression
- Attenuation / Gain Adjustments
- MWI - Message Waiting Indicator Tones
- VMWI - Visual Message Waiting Indicator - Via NOTIFY, SUBSCRIBE
- Third Party Call Control (RFC 3725)
Security- Password Protected System, Preset to Factory Default
- Password Protected Access to Administrator and User Level Features
- HTTPS with Factory Installed Client Certificate
- HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
- Up to 256-bit AES Encryption
Provisioning, Administration, and Maintenance- Integrated Web Server Provides Web Based Administration and Configuration
- Integrated Voice Response system to report and modify configuration parameters
- Automated Provisioning and Upgrade via HTTPS, HTTP, TFTP
- Asynchronous Notification of Upgrade Availability via NOTIFY
- Non-intrusive, In-Service Upgrades
- Report Generation and Event Logging
- Statistics Transmitted in BYE Message
- Syslog and Debug Server Records - Configurable Per Line
Physical Interfaces- 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
- Handset: RJ-7 Connector
Power Supply- Switching Type (100-240v) Automatic
- DC Input Voltage: +5 Volts DC at 2.0 Amps Maximum
- Power Consumption: 5 Watts
- Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Indicator Lights/LED- Status LED
- Message Waiting Indicator LED
- Flash Button with Indicator LED
- LED Test Function
Documentation- Quick-Start Installation and Configuration Guide
- User Guide
- Administration Guide
- Provisioning Guide - For Service Providers Only
Dimensions: (W x H x D): 4.13 x 3.75 x 8.38 inches (104.78 x 95.25 x 212.73 mm)
Unit Weight: 1.70 lbs (0.7711 kg)
Operating Temperature: 32 to 113 � F (0 to 45 � C)
Storage Temperature: -13 to 185 � F (-25 to 85 � C)
Operating Humidity: 10 to 90% Non-condensing
Storage Humidity: 10 to 90% Non-condensing
|
