Condtion: New

Linksys WBP54G Wireless Bridge
For Linksys IP Phones and Analog Adapters
802.11b/g compatible
Transmit Power: 13 dBm


Product Description

Now you can put your IP Phone almost anywhere in the building, without the cost and hassle of running network cables. The Wireless-G Bridge for Phone Adapters was specially designed to convert your IP Phone into a wireless device, so it can connect to your network without an Ethernet cable. This lets you put your IP Phone where it's most convenient and frees you from the constraints of plugging into the nearest network port.
 

Features

• Put your IP Phone wherever you want, with no cabling hassle
• Connects your IP Phone to your Wireless-G or Wireless-B network
• Shares power with the IP Phone -- only one AC Adapter necessary
• Wireless connection protected by WEP, WPA or WPA2 encryption
   

To make installation even more convenient, the Wireless-G Bridge shares electrical power with the IP Phone, so only one AC Adapter is needed. To get connected, just plug your existing IP Phone's power jack into the Wireless-G Bridge, and the Bridge's power and data cables to the IP Phone. The included Setup Wizard makes it easy to configure the Bridge to your wireless network's settings. To protect your privacy, all wireless voice transmissions can be encrypted with WEP or industrial-strength Wi-Fi Protected Access (WPA/WPA2) security.

So don't hassle with running cables around the room to your IP Phone — get connected the easy way with the Linksys Wireless-G Bridge for Phone Adapters.

Specifications

Model: WBP54G

Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g

Port: One 5V/2A DC power input port

LEDs: Ethernet and Wireless

Cabling Type: One combo-power/Ethernet cable attached to the device with DC power jack and RJ-45 Ethernet connector

Antennas: One internal Helix antenna

Connector Type: One combo-power/Ethernet cable attached to the device with DC power jack and RJ-45 Ethernet connector

RF Pwr (EIRP) in dBm: 13 dBm (802.11g) / 17 dBm (802.11b)

Antenna Gain: 1 dBi

Security Features: WPA2, WPA, WEP

WEP Key Bits: 64, 128

Dimensions: 2.01" x 3.62" x 1.14" (51 mm x 92 mm x 29 mm)

Unit Weight: 2.54 oz. (0.072 kg)

Power: External, 5V DC, 2.0A (Not included, use the power adapter shipped with Linksys phone adapter or IP phone products)