|
Condition: New
Patton Smartlink M-ATA Analog Adapter
1 FXS Port + 1 Ethernet Port
Protocols: SIP, MGCP
Product Description
The SmartLink Micro Analog Telephone Adapter provides connectivity for analog
phones and faxes to a home, home office or corporate LAN. Connecting to any
analog phone, fax or PBX, the SmartLink product is ay cost effective solution
for small offices and telecommuters to access Internet-based telephone services
and corporate intranet systems across established LAN and Internet connections
like xDSL and cable modems.
The M-ATA provides one Ethernet (RJ-45) port and one FXS (RJ-11) analog phone
port for quick and easy interconnection to the local LAN. LEDs show at-a-glance
the status of the system, LAN, WAN, and phone ports.
A full suite of IP features (DHCP, NAT/PAT) are available to maximize universal
connectivity. VLAN tagging and prioritization enables voice traffic to be
handled before data traffic insuring higher quality voice calls. Support for
PPPoE tunneling simplifies extending corporate intranet services to
telecommuters.
The user friendly web interface offers two levels of configuration; level one
covers basic subscriber specific parameters, level two offers advanced settings
for the transport network. Configuration and firmware can be downloaded from a
centralized TFTP or HTTP server.
The M-ATA is SIP and MGCP standard compliant. Analog phones attached to the
SmartLink can use advanced calling features such as call forwarding, caller ID,
3-way calling, call holding, call retrieval and call transfer.
Typical applications
Patton's Micro Analog Telephone Adapter provides seamless access to Internet
telephony and data services. The M-ATA connects to any broadband access provider
via a cable or xDSL modem.
Product Specifications
|
Voice
Connectivity |
2-wire Loopstart,
RJ-11/12 Short haul loop 1.1 km
@3REN
Caller-ID Type-1/2 FSK and ITU
V.23/Bell 202 generation |
|
Connectivity |
1 10/100Base-TX Full Duplex/Autosensing
Ethernet RJ-45 |
|
Voice Processing (signalling dependent) |
SIP MGCP
- Packet Cable NCS 1.0
- IETF MGCP 1.0
Voice CODECS
- G.711 A-Law/µ-Law (64 kbps)
- G.726 (ADPCM 40, 32, 24, 16 kbps)
- G.723.1 (5.3 or 6.3 kbps)
- G.729ab (8 kbps)
G.168 echo cancellation
2 parallel voice connections
DTMF detection and generation
Carrier tone detection and generation
Silence suppression and comfort noise
Configurable dejitter buffer
DTMF in-band & out-of-band
Configurable transmit packet length
RTP/RTCP (RFC 1889)
STUN |
|
Fax and Modem Support |
G.711 transparent FAX T.38
Fax relay (9.6 k, 14.4 k) |
|
Voice Services/Features |
Anonymous CallerID block
Call blocking
Call forward - on busy
Call forward - selective
Call forward - unconditional
Call hold/retrieve
Call return
Call transfer - blind
Call transfer - with consultation
Call waiting/retrieval
Caller-ID
Conference drop
Conferencing (3-way calling)
Distinctive ring
Do not disturb
Hotline calling
Incoming CallerID on/off
IP URL dialing
Message waiting indication
Self-caller ID block
Speed dial
Voicemail message retrieval
Warmline calling |
|
IP Services |
NAPT
DHCP client
PPPoE
Programmable static routes
ICMP redirect (RFC 792); Packet fragmentation
VLAN support 802.1p/q |
|
Management |
Browser configuration interface
Multilevel security access
TFTP & HTTP configuration & firmware loading
SNMP v2 agent (MIB II and private MIB)
Syslog support |
| Operating
Environment |
Operating
temperature: 0-40°C (32–104°F)
Operating humidity: 5-80% (non condensing) ) |
| System
|
Power: 100-240 VAC
(50/60 Hz) |
| Compliance |
EMC compliance:
EN55022 and EN55024
Safety compliance: EN 50950
CE compliance
FCC Part 15 Class B |
| Physical
|
Dimensions:
3.6L x 2.1W x 0.78H in. (9.0L x 5.3W x 1.9H cm)
Weight: 0.2 lbs (0.09 kg) |
|
