 |
 |
 |
 |
Condition: New
PowerSense BL-8600 PoE Module
Ports: 2
Protocols: Cisco CDP
Product Description
The PowerSense™ BL-8600 is a two port Cisco CDP compliant PoE module for the PowerSense BL-8220 and BL-8210 PoE Hub Chassis.
Features/Benefits
- Individual power modules, hot swappable in the 19" rackmount ready
chassis, use 1 per powered device
- Each module is current limited for short circuit protection with power
isolation of 1KV between ports for safety
- Each module has user replaceable fuses for recovery from power surge or
lightning damage, quickly repair any module
- Each module auto-detects the power requirement and offers transparent
10/100Mb and management operations
- Each module has FOUR diagnostic LED's - as shown above
- Mix and match modules for compatiblity with IEEE 802.3af or legacy Cisco
CDP™ powered devices, 24 Volt Protocol or 12 Volt Protocol
- Standard or High Wattage modules available
BL-8000 Model Information
- Chassis only - without Modules
- BL-8220 20 Slot PowerSense™ Chassis - 19" Rack Mount Ready
- BL-8210 10 Slot PowerSense™ Chassis - with rubber feet
- BL-8210-RM 10 Slot PowerSense™ Chassis - 19" Rack Mount Kit
- BL-8210-WM 10 Slot PowerSense™ Chassis - Wall Mount Kit
- Chassis - Complete with 20 Standard Power Chassis Modules
- BL-8320 20 Power & Data Modules - 12 volt protocol
- BL-8420 20 Power & Data Modules - 24 volt protocol
- BL-8520 20 Power & Data Modules - IEEE 802.3af compatible
- BL-8620 20 Power & Data Modules - Cisco CDP™ protocol
- Chassis - Complete with 10 Standard Power Chassis Modules
- BL-8310 10 Power & Data Modules - 12 volt protocol
- BL-8410 10 Power & Data Modules - 24 volt protocol
- BL-8510 10 Power & Data Modules - IEEE 802.3af compatible
- BL-8610 10 Power & Data Modules - Cisco CDP™ protocol
- Chassis Modules - Standard Power - for Devices up to 15.4 watts, uses
1 slot
- BL-8300 Power & Data Module, 12 volt protocol
- BL-8400 Power & Data Module, 24 volt protocol
- BL-8500 Power & Data Module, IEEE 802.3af compatible
- BL-8600 Power & Data Module, Cisco CDP™ protocol
- Chassis Modules - High Wattage - for Devices up to 20 watts, uses 2
slots
- BL-8300HW Double Wide Power & Data Module, 12 volt protocol
- BL-8500HW Double Wide Power & Data Module, IEEE 802.3af compatible
- BL-8600HW Double Wide Power & Data Module, Cisco CDP™ protocol
- Chassis Modules - Custom Power for specific products
- BL-8400SP400101 Module, Supports Smarteye Cameras
- BL-8400M58305AP Module, Supports Trango Braodband AP up to 50 metter
cable length
- BL-8400IQEYE3 Module, Supports IQinvision IQEYE3 camera
- BL-8400MXD03 Module, Supports Mobotix MX-D-03 camera
- BL-8300IVC100 Module, Suppports IndigoVision camera
- BL-8300AXIS205 Module, Supports AXIS Model 205 camera
- BL-8300AXIS2120 Module, Supports AXIS Model 2120 camera
- BL-8300SNCRZ30N Module, Supports SONY SNCRZ30N camera
- BL-8300SR600101 Module, Supports Savi Products
- Chassis - Cover Plates for unused slots
- BL-8201 Single Slot cover plate
- BL-8202 Two Slot cover plate
- BL-8205 Five Slot cover plate
- BL-8206 Six Slot cover plate
- Data & Power Splitting Y cables for 12 volt applications RJ45
female/male and male power pin. Plug size/applications below:
- BL-820Y-01 2.5mm plug for AXIS PTA-20, 2100, 2120
- BL-820Y-02 2.1mm plug for Vivotek PTV-20
- BL-820Y-03 1.3mm plug for Intelinet PTI-20
- BL-820Y-04 No plug, bare wire for IVC 100
- BL-820Y-05 Special connector for Symbol AP-41XX
- BL-820Y-06 5.5mm barrel w/1.0mm center for Sony SNC-RZ30N, Sony
PTS-20, AXIS 2130
- BL-820Y-07 MAXI 7 pin socket for SAVI
- BL-820Y-08 CONXALL 6 pin for SAVI SR-600-101
- BL-820Y-09 1.0mm plug for AXIS 205, 210, 230, 241Q/S, 250S-206
- BL-820Y-10 2.1mm plug on 8" power wire for symbol AP 3020 series
- Single Port Models - Standard Modules - for Devices up to 15.4 watts,
w/power supply
- BL-8351 Single Power & Data port - 12 volt protocol
- BL-8451 Single Power & Data port - 24 volt protocol
- BL-8551 Single Power & Data port - IEEE 802.3af compatible
- BL-8651 Single Power & Data port - Cisco CDP™ protocol
- Single Port Models - High Wattage - for Devices up to 20 watts, with
power supply
- BL-8351HW Single Power & Data port - 12 volt protocol
- BL-8551HW Single Power & Data port - IEEE 802.3af compatible
- BL-8651HW Single Power & Data port - Cisco CDP™ protocol
- Power over Ethernet Connectors
- BL-8858-01 PoE Connector allows a Cisco 7900 series IP phone to take
Power over Ethernet from an IEEE 802.3af style Ethernet switch or
mid-span power injector.
- BL-8858-02 PoE Connector allows a Cisco 7900 series IP phone to take
Power over Ethernet from an IEEE 802.3af style HP Pro Curve Ethernet
switch
|
|
 |
 |
|
 |
|
 |

|