|
Condition: New
Rhino R1T1 Single Port T1/E1
Interface: PCI
Product Description
Providing
reliable, flexible, and leading-edge solutions for a demanding industry.
Managing your Open Source telecommunication needs has never been easier than
with Rhino products. Rhino PCI plug-in cards satisfiy the needs of Open Source
Telephony (OST) applications, no matter how stringent the requirement. Rhino
Open Source Telephony PCI cards feature Asterisk and Linux tested software.
Knowing that Rhino products are ready to perform right out of the box means that
you can spend more time developing important customer relationships.
Using Asterisk? Rhino Open Source Telephony PCI products allow you to utilize
analog phones and wiring in conjunction with leading-edge Asterisk technology --
without having to buy expensive IP telephones. Why go IP when you can save on
installations by using your existing wiring? With Rhino you can use lower cost
analog phones with digital features and get guaranteed T1 voice quality, all
while enjoying Asterisk VoIP technology for off-premise connectivity.
Features:
- Asterisk soft PBX tested and ready
- Zaptel compliant open source module source code included
- T1/E1 - PRI/ISDN embedded CSU
- Line buildout software selectable
- Custom Rhino PCI interface chip means no wasted CPU overhead
- Fractional voice and data capable
- Zttool compliant interface
- Field software upgradable
- T1 crossover cable included
- Alarm and Link status LEDs visible from the rear bracket
- E&M, PRI, Loop, Ground, Kewl, etc, signaling protocols
- Distinctive ring in Loop start mode
- Caller ID enabled in Loop start mode
- 5-year limited warranty
- Unlimited Support
CSU Features:
- All Rhino PCI T1 cards feature a single chip integrated CSU with both
LIU and Framer, that is software controlled and software programmable - no
jumpers
- Complete T1/DS1/ISDN-PRI/J1 Transceiver Functionality
- Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and
Waveshaping
- Crystal-Less Jitter Attenuator
- Fully Independent Transmit and Receive Functionality
- Single chip line interface unit (LIU) and Framer
- Power Consumption: Maximum power consumption (under full load) will not
exceed 100W.
Zaptel Selections
- T1: D4 or ESF, AMI or B8ZS
- Line buildout selections: 0-133 feet or 0db, 133-266 feet, 266-399 feet,
399-533 feet, 533-655 feet, -7.5db, -15db, -22.5db
- Loopback modes under software selection (zttool)
Rhino products are tough. In the rare case of trouble, our technical support
staff is ready to give you the support you need, when you need it. Our 5-year
limited warranty means that you can be confident that Rhino will always work
hard and work well in your T1 application.
Mechanical Data
Size: 2.5” tall, 4.75” wide
Form Factor: Single PCI slot
|
