| Condition: New
Linksys - Sipura
SPA-2002 VoIP Adapter
Ports: 2 FXS + 1 Ethernet
Supported Protocols: SIP
Status: Unlocked
THE LINKSYS SPA-2002 HAS BEEN RENAMED BY LINKSYS TO "PAP2T-NA".
- This is a name change only, the hardware specifications are unchanged.
- All orders for SPA-2002 will be shipped with the new model number "PAP2T-NA".
This unit is not locked to any service provider and is fully compatible with Asterisk.
Product Description:
Inexpensive, easy-to-install and simple-to-use, the
SPA-2002 connects standard telephones and fax machines to IP-based data
networks. IP telephony service providers and enterprises can offer users
traditional and enhanced communication services via the customer's broadband
connection to the Internet or Local Area Network (LAN). The SPA features two
POTS (Plain Old Telephone Service) ports for connection to existing analog
phones, fax machines, PBX and key system communication platforms. The SPA
includes an Ethernet interface for connection to a home or office LAN. With the
SPA-2002, each phone port can be independently provisioned via software
controlled by the service provider or the end user. With the SPA, individuals
and companies are able to protect and extend their past investments in
telephones, conference speakerphones and fax machines as well as control their
migration to IP with an extremely affordable, incremental investment.
Installed by the end user and remotely provisioned, configured and maintained by
the service provider, each SPA converts voice traffic into data packets for
transmission over an IP network. The SPA can be used in consumer and business IP
telephony service offerings including full-featured IP Centrex. The SPA delivers
clear sounding voice and reliable fax calling through its implementation of
internationally recognized standards for voice and data networking.
Please note: Sipura has discontinued the
SPA-2000, the SPA-2002 is the replacement model.
SPA-2002 Telephony Features
- Two voice ports (RJ11) for analog phones or Fax machines
- Impedance Agnostics - 8 Configurable Settings
- Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
- Caller ID with Name/Number (Multi-national Variants)
- Caller ID Blocking
- Call Forwarding: No answer, Busy, All
- Do Not Disturb
- Call Transfer
- Three-way Conference Calling with Local Mixing
- Message Waiting Indication - Visual and Tone Based
- Call Return
- Call Back on Busy
- Call Blocking with Toll Restriction
- Delayed Disconnect
- Distinctive Ringing - Calling and Called Number
- Off-hook Warning Tone
- Selective/Anonymous Call Rejection
- Hot line and Warm Line Calling
- Speed Dialing of 8 Numbers/Addresses
- Music on Hold
Package Contents
- 1 - SPA2002 Phone Adapter Unit
- 1 - 5v Power Adapter - 1.8m Cord
- 1 - RJ45 Ethernet Cable - 1.8m Cord
Model
SPA-2002
* Note: Many specifications are programmable within a defined range or list of options.
Please see the SPA Administration Guide for details. The configuration profile is uploaded
to the SPA2002 at the time of provisioning.
Data Networking
- MAC Address (IEEE 802.3)
- IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
- ARP - Address Resolution Protocol
- DNS - A Record (RFC 1706), SRV Record (RFC 2782)
- DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
- ICMP - Internet Control Message Protocol (RFC792)
- TCP - Transmission Control Protocol (RFC793)
- UDP - User Datagram Protocol (RFC768)
- RTP - Real Time Protocol (RFC 1889) (RFC 1890)
- RTCP - Real Time Control Protocol (RFC 1889)
- DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
- SNTP - Simple Network Time Protocol (RFC 2030)
Voice Gateway
- SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
- SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
- Re-registration with Primary SIP Proxy Server
- SIP Support in Network Address Translation Networks - NAT (incl. STUN)
- Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
- Codec Name Assignment
Voice Algorithms
- G.711 (A-law and μ-law)
- G.726 (16/24/32/40 kbps)
- G.729 A
- G.723.1 (6.3 kbps, 5.3 kbps)
- Dynamic Payload
- Adjustable Audio Frames per Packet
Fax Capability
- Fax Tone Detection Pass-Through
- Fax Pass-Though - Using G.711
- DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
- Flexible Dial Plan Support with Interdigit Timers and IP Dialing
- Call Progress Tone Generation
- Jitter Buffer - Adaptive
- Frame Loss Concealment
- Full Duplex Audio
- Echo Cancellation (G.165/G.168)
- VAD - Voice Activity Detection with Silence Suppression
- Attenuation / Gain Adjustments
- Flash Hook Timer
- MWI - Message Waiting Indicator Tones
- VMWI - via FSK
- Polarity Control
- Hook Flash Event Signaling
- Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
- Music on Hold Client
- Streaming Audio Server - up to 10 sessions
Security
- Password Protected System Reset to Factory Default
-
Password Protected Admin and User Access Authority
-
Provisioning/Configuration/Authentication:
-
HTTPS with Factory Installed Client Certificate
-
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
-
Up to 256-bit AES Encryption
Provisioning, Administration & Maintenance
- Web Browser Administration & Configuration via Integral Web Server
-
Telephone Key Pad Configuration with Interactive Voice Prompts
-
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
-
Asynchronous Notification of Upgrade Availability via NOTIFY
-
Non-intrusive, In-Service Upgrades
-
Report Generation & Event Logging
-
Stats in BYE Message
- Syslog & Debug Server Records - Per Line Configurable
Physical Interfaces
- 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
-
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Subscriber Line Interface Circuit (SLIC)
- Ring Voltage: 40-55 VRMS Configurable *
-
Ring Frequency: 10 Hz - 40 Hz *
- Ring Waveform: Trapezoidal and Sinusoidal *
-
Maximum Ringer Load: 3 REN
- On-hook/off-hook Characteristics:
-
On-hook voltage (tip/ring): -50 V NOMINAL
-
Off-hook current: 25 mA min
- Terminating Impedance: 8 Configurable Settings included
Regulatory Compliance
- North America 600 ohms, European CTR21
-
FCC (Part 15, Class B) , CE, ICES-003
Power Supply
- DC Input Voltage: +5 VDC at 2.0 A Max.
-
Power Consumption: 5 Watts
- Switching Type (100-240v) Automatic
-
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Indicator Lights/LED
- LAN Activity/Link LED
- Status LED (In-Use, Provisioning, Idle, Alert)
Documentation
- Quick-Start Installation and Configuration Guide
-
User Guide
- Administration Guide - Service Providers Only
-
Provisioning Guide - Service Providers Only
Dimensions: 3.11 x 1.12. x 3.79 in (78.99 x 28.45 x 96.27 mm) W x H x D
Unit Weight: 3.17 oz (0.09 kg)
Operating Temp.: 41~113F (5~45C)
Storage Temp.: -13~185F (-25~85C)
Operating Humidity: 10~90% Non-condensing
Storage Humidity: 10~90% Non-condensing
Data Sheet
| SPA Model |
Service Lines |
Active Calls |
3-Way Conferences |
FXO Ports |
| SPA-1001 |
2 |
2 |
1 |
0 |
| SPA-2002 |
2 |
4 |
2 |
0 |
| SPA-2100/SPA-2101 |
2 |
4 |
2 |
0 |
| SPA-3000/SPA-3102 |
2 |
3 |
1 |
1 |
Note:
The SPA-2100 supports up to 2 sessions using G.729. The SPA-1001, SPA-2002 and
SPA-3000 support one G.729 session.
|
