| Condition: New
Sangoma A102D-X T1/E1 Card
Ports: 2 T1/E1
Interface: PCI Express
Includes Hardware Echo Cancellation
Warranty: Five years parts and labor
Product Description
The A102 is the dual port version of Sangoma's family of
Advanced, Flexible Telecommunications (AFT) hardware designed for
optimum support of voice and data over T1, E1 and J1.
Obtainable
in both PCI (A102) and PCI Express (A102-X) form factors, The A102
provides up to 8.2Mbps of full duplex data throughput or 60 voice calls
over two T1 and or E1 lines to support high performance PCI-based
routing and telephony systems. Advanced clocking features allow E1 and
T1 lines to be mixed with full synchronization. As part of Sangoma's
AFT range of products, the A102 makes use of the same high performance
PCI interface that has been deployed in large quantities all over the
world.
The available A102d and A102d-X cards include Octasic's DSP
hardware and certified algorithms providing carrier-grade echo
cancellation and Voice Quality Enhancement (VQE) functions. Like all
the Sangoma AFT family, the A102 is field upgradeable to take advantage
of hardware and software improvements as they become available.
Voice modes
- The A102 drivers fully support TDM voice gateways for the Asterisk, Yate, OPAL PBX/IVR projects, as well as other Open Source and proprietary
PBX/Switch/IVR/VoIP gateway applications.
- Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
- Optimized per channel DMA streams and hardware-level HDLC handling unload the
host CPU.
- EDAC (patent pending) technology is integrated to drastically reduce the load due to software echo cancellation, which is the largest component of CPU load in
a typical soft PBX system.
- Field upgradeable hardware allows for new TDM-related functions to be added as
they become available.
Mixed Voice/Data mode
- Combination of router/PBX functions in one server - Asterisk as an option.
- Both 8 bit (64kbps per channel) and 7 bit (56kbps per channel) board-level HDLC
support.
- WAN data connection is supported by Sangoma’s standard WANPIPE routing stack
providing certified Frame Relay, PPP and HDLC.
Technical Specifications
- Intelligent hardware: Downloadable Field Programmable Gate Array programming
with multiple operating modes.
- T1/E1 and fractional T1/E1, single channel HDLC per line
- Power: 520mA at +5v
- PCI 32 bit (5v and 64 bit (3.3v) compatible.
- Temperature range: 0 - 45C.
- All set-up and configuration is in software or by machine BIOS.
- DSU/CSU set up entirely in software.
- Line decoding: HDB3, AMI, B8ZS.
- Framing: CRC4, non-CRC4, ESF, D4T1/E1.
- Clocking mode: Normal , Master.
- Software controlled DSU/CSU test modes.
- Remote monitoring of card and CSU/DSU operation.
Dimensions
2U Form factor: 120mm x 55 mm.
Operating systems
Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD
(X.25, BSC and SS7 NOT available on BSD)
Higher level protocols
Asterisk Open PBX/IVR, IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.
Warranty
Five (5) years parts and labor.
Certifications
FCC Part 68
FCC Part 15 Class A
CISPR 22
CISPR 24
Safety: 6095-1 (worldwide)
Australian AFIC-S016-2001
Production quality
ISO 9002
|
