Condition: New

Sangoma A102-X T1/E1 Card
Ports: 2 T1/E1
Interface: PCI Express
Warranty: Five years parts and labor


Product Description

The A102-X is the dual port PCI Express version of Sangoma family of Advanced, Flexible Telecommunications (AFT) hardware designed for optimum support of voice and data over T1, E1 and J1.

Obtainable in both PCI (A102) and PCI Express (A102-X) form factors, The A102 provides up to 8.2Mbps of full duplex data throughput or 60 voice calls over two T1 and or E1 lines to support high performance PCI-based routing and telephony systems. Advanced clocking features allow E1 and T1 lines to be mixed with full synchronization. As part of Sangoma’s AFT range of products, the A102 makes use of the same high performance PCI interface that has been deployed in large quantities all over the world.

The available A102d and A102d-X cards include Octasic's DSP hardware and certified algorithms providing carrier-grade echo cancellation and Voice Quality Enhancement (VQE) functions. Like all the Sangoma AFT family, the A102 is field upgradeable to take advantage of hardware and software improvements as they become available.

Voice modes

• The A102 drivers fully support TDM voice gateways for the Asterisk, Yate, OPAL PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  
  
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  
  
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  
  
• EDAC  (patent pending) technology is integrated to drastically reduce the load due to software echo cancellation, which is the largest component of CPU load in a typical soft PBX system.
  
  
• Field upgradeable hardware allows for new TDM-related functions to be added as they become available.

Mixed Voice/Data mode

• Combination of router/PBX functions in one server - Asterisk as an option.
  
  
• Both 8 bit (64kbps per channel) and 7 bit (56kbps per channel) board-level HDLC support.
  
  
• WAN data connection is supported by Sangoma’s standard WANPIPE routing stack providing certified Frame Relay, PPP and HDLC.
  

• Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes.
  
  
• T1/E1 and fractional T1/E1, single channel HDLC per line
  
  
• Power: 520mA at +5v
  
  
• PCI 32 bit (5v and 64 bit (3.3v) compatible.
  
  
• Temperature range: 0 - 45C.
  
  
• All set-up and configuration is in software or by machine BIOS.
  
  
• DSU/CSU set up entirely in software.
  
  
• Line decoding: HDB3, AMI, B8ZS.
  
  
• Framing: CRC4, non-CRC4, ESF, D4T1/E1.
  
  
• Clocking mode: Normal , Master.
  
  
• Software controlled DSU/CSU test modes.
  
  
• Remote monitoring of card and CSU/DSU operation.

Dimensions

2U Form factor: 120mm x 55 mm.



Operating systems

Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD (X.25, BSC and SS7 NOT available on BSD)



Higher level protocols

Asterisk Open PBX/IVR, IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.



Warranty

Five (5) years parts and labor.



Certifications

FCC Part 68
FCC Part 15 Class A
CISPR 22
CISPR 24
Safety: 6095-1 (worldwide)
Australian AFIC-S016-2001



Production quality

ISO 9002