Home
IP Phones
Headsets
Analog Adapters
IP Gateways
IP PBXs
IP PBX / Asterisk Hardware
VoIP Accessories
VoIP Loudspeaker / Paging
VoIP Network Equipment
Power Over Ethernet
Configuration Support
Select Manufacturer
Aastra
ArtDio
Asterisk
Audiocodes
Belkin
Cisco
Cisco Systems
CyberData
Dialogic
Digium
dlink
Edgewater
Epygi
Grandstream
ipDialog
kentrox
Linksys
Mediatrix
netgear
OPENVOX
Patton
Plantronics
Polycom
PowerSense
Rhino
Sangoma
Schmooze
SEI
Snom
Sysmaster
trixbox
UTstarcom
Vxi
ZOOM
The VoIP Equipment Blog
Quote Beater
Product Warranties
Return Policy
Payment FAQ
Privacy Policy
VoIP Articles
Product Index
Credit Card Processing
Home
>
Sangoma A104D-X Four Port T1/E1 Card w/ Echo Cancellation - PCI Express
Sangoma A104D-X
Our Price:
$2,264.95
Product Code: SANGOMA-A104D-X
Guaranteed Replacement Warranty:
No Guaranteed Replacement Warranty
1 Year Guaranteed Replacement [Add $249.99]
2 Year Guaranteed Replacement [Add $499.99]
3 Year Guaranteed Replacement [Add $749.99]
Qty:
Description
Condition: New
Sangoma A104D-X T1/E1 Card
Ports: Four T1/E1
Includes Hardware Echo Cancellation
Interface: PCI Express
5 Year Warranty
Product Description
The A104 is the quad port version of Sangoma's family of Advanced, Flexible Telecommunications (AFT) hardware designed for optimum support of voice and data over T1, E1 and J1.
Obtainable in both PCI (A104) and PCI Express (A104-X) form factors, The A104 provides up to 16.4Mbps of full duplex data throughput or 120 voice calls over four T1 and or E1 lines to support high performance PCI-based routing and telephony systems. Advanced clocking features allow E1 and T1 lines to be mixed with full synchronization. As part of Sangoma’s AFT range of products, the A104 makes use of the same high performance PCI interface that has been deployed in large quantities all over the world. The available A104d and A104d-X cards include Octasic's DSP hardware and certified algorithms providing carrier-grade echo cancellation and Voice Quality Enhancement (VQE) functions. Like all the Sangoma AFT family, the A104 is field upgradeable to take advantage of hardware and software improvements as they become available.
- Four T1/E1 ports with a single PCI interface for high performance voice and data applications.
- TDM clocking mode: Network timing can be passed from a network -connected DS0 to any or all of the other ports. Both T1 and E1 are supported simultaneously, making it possible to mix T1 channel banks and E1 networks with full channel synchronization.
- Line decoding: HDB3, AMI, B8ZS. Framing: CRC4, non-CRC4, ESF, D4T1/E1.
- Support for the Asterisk, OPAL Yate, FreeSwitch PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
- All Sangoma’s AFT products, including the A104 card use the same base PCI interface card, and the same professionally engineered firmware on the same family of Field Programmable Gate Arrays
- A104, A104d PCI: Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing without manual tuning.
- A104-X, A104d-X PCI Express: 1 Lane PCI Express bus.
- Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
- Short 2U compatible mounting clips included for installation in 2U rackmount servers.
- High quality, tested RJ45 cables included. Power: 800mA peak, operational 300mA max at +3.3v or 5v.Temperature range: 0 – 50C. Autosense compatibility with 5v and 3.3v PCI busses.
- Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features related to voice and/or data can be added when they become available.
- 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
- Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
- Supports Robbed Bit Channel Associated Signaling (CAS)and ISDN PRI.
- T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
- Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
- EDAC (patent pending) technology will be integrated to drastically reduce the cost of echo cancellation.
- Field upgradeable hardware allows for new TDM-related functions to be added as they become available.
- Raw bitstream interfaces can be used to support arbitrary non-standard line protocols such as non-byte aligned monosynch or bisynch.
- WAN data connection is supported by Sangoma’s standard WANPIPE® routing stack, and is completely independent of TDM voice application for total system reliability.
- WANPIPE supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25.
Higher level protocols
IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.
Share your knowledge of this product with other customers...
Be the first to write a review.
About Us
Employment Opportunities
Send Us Feedback
Bookmark Us
