Toll Free: 866.987.VOIP
Cart Subtotal: $0.00

Linksys SPA8000-G1 - 8 FXS PORTS - Unlocked (SPA8000-G1) New

SKU: SPA8000-G1-NEW

Be the first to review this product

Availability: In stock

$279.95
OR

Quick Overview

Linksys SPA-8000-G1 Analog Adapter
8 FXS Ports + 1 RJ45
Protocol: SIP



Click images to enlarge

Condition: New

Linksys SPA8000 Analog Adapter / VoIP Gateway
Ports: 8 FXS + 1 RJ45 + 1 RJ21
Supported Protocols: SIP
Status: Unlocked

SPA8000 Product Description

The Linksys SPA8000 8-Port IP Telephony Gateway is a full featured Analog Terminal Adapter (ATA) for small business enterprises providing enhanced communication services via a broadband connection to the Internet. The SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multi-port RJ-21 50-pin connector offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100Base-T RJ-45 Ethernet interface to connect to either a router or multilayer switch.

Solid in design, the SPA8000 is an affordable solution that is ideally suited for use in business and consumer VoIP service offerings including call centers and multi-dwelling environments. Customers can also protect and extend their investments by continuing to utilize their existing analog telephones and teleconferencing equipment. Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA8000 converts voice traffic into data packets for transmission over an IP network and uses common standards for voice and data networking for reliable voice and fax operation.


Toll Quality Voice and Carrier-Grade Feature Support

The SPA8000 delivers clear, high-quality voice communication in diverse network conditions. Excellent voice quality in a demanding IP network is consistently achieved via our advanced implementation of standard voice coding algorithms. The SPA8000 is interoperable with common telephony equipment like voicemail, Fax, PBX, and interactive voice response systems.

Large-Scale Deployment and Management
The SPA8000 offers all the key features and capabilities with which service providers can provide customized services to their subscribers. The SPA8000 can be remotely provisioned and supports dynamic, in-service software upgrades. A secure profile upload saves providers the time, expense and hassle of managing and pre-configuring or re-configuring customer premise equipment (CPE) for deployment.

Ironclad Security
Linksys understands that security for both end users and service providers is a fundamental requirement for a solid, carrier-grade telephony service. The SPA8000 supports secure, encryption-based methods for communication, provisioning and servicing.


SPA8000 Features

Eight voice ports (RJ11) for analog phones or Fax machines
Impedance Agnostics - 8 Configurable Settings
Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
Caller ID with Name/Number (Multi-national Variants)
Caller ID Blocking
Call Forwarding: No answer, Busy, All
Do Not Disturb
Call Transfer
Three-way Conference Calling with Local Mixing
Message Waiting Indication - Visual and Tone Based
Call Return
Call Back on Busy
Call Blocking with Toll Restriction
Delayed Disconnect
Distinctive Ringing - Calling and Called Number
Off-hook Warning Tone
Selective/Anonymous Call Rejection
Touch Tone Phone Keypad Configuration with Interactive Voice Response (IVR)
Fax: G.711 Pass Through or Real Time Fax over IP via T.38*
*T.38 support is dependent on fax machine and network/transport resilience


Package Contents

1 - SPA8000 Phone Adapter Unit
1 - 12v Power Adapter
1 - RJ45 Ethernet Cable
1- Quick Installation Guide


SPA8000 Specifications

* Note: Many specifications are programmable within a defined range or list of options. Please see the SPA Administration Guide for details. The target configuration profile is uploaded to the SPA8000 at the time of provisioning.

MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
PPoE Client - Point to Point Protocol over Ethernet (RFC 2516)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
VLAN Tagging - 802.1p
SNTP - Simple Network Time Protocol (RFC 2030)
Upload Data Rate Limiting - Static and Automatic
QoS - Voice Packet Prioritization over Other Packet Types
MAC Address Cloning
Port Forwarding
SIP channels support both UDP and TCP transport
VPN Pass-Through with IPSec ESP, PPTP, and L2TP
SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
    - SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
    - Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT (incl. STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
Codec Name Assignment
    - G.711 (a-law and μ-Law)
    - G.726 (16/24/32/40 kbps)
    - G.729 A
    - G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload
Adjustable Audio Frames per Packet
Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP Dialing
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Comfort Noise Generation (CNG)
QoS (Ethernet port up-stream bandwidth control, Physical port, MAC address, Application)
Attenuation / Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - Visual Message Waiting Indicator via FSK
Polarity Control
Hook Flash Event Signalling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions
System DDR SDRAM - 16M Bytes
System Flash ROM - 4M Bytes


Security

Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
    - HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Authentication: EAP-TLS, EAP-TTLS, and EAP-PEAP
SIP TLS (Transport Layer Security)
Up to 256-bit AES Encryption


Provisioning, Administration & Maintenance


Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records
Per Line and Purpose Configurable Syslog and Debug Options


Physical Interfaces

8 port standard FXS voice ports (RJ-11)
RJ-21 (50-pin telco connector) multi-port voice connection
1 WAN 100baseT RJ-45 Ethernet Port (IEEE 802.3)
Reset button


Subscriber Line Interface Circuit (SLIC)

Ring Voltage: 40-90 Vpk Configurable
Ring Frequency: 20 Hz - 25 Hz
Ring Waveform: Trapezoidal
Maximum Ringer Load: 5 REN
On-hook/off-hook Characteristics:
    - On-hook voltage (tip/ring): -46 ~ -56V
    - Off-hook current: 18-25 mA
    - Terminating Impedance: 600 ohm resistive or 270 ohm + 750ohm//
150nF complex impedance
Frequency Response 300 3400Hz
Return Loss (600 ohm, 300-3400Hz) Up to 20dB
Insertion Loss (1 Vrms @1 kHz) 3dB 4dB
THD (350 mV peak @ 300 Hz) Up to 3%
Idle Channel Noise -72 dB (typ.)
Longitudinal Balance 55 dB (typ.)
Off Hook Threshold (Line Seizure) Rdc < 1000 ohm
On Hook Threshold (Line Release) Rdc >10000 ohm
Rdc DC Supervisory Range Rdc > 450 ohm


Regulatory Compliance

FCC (Part 15 Class B), CE, ICES-003, C-Tick Certification, RoHS, UL


Power Supply

Switching Type (100-240v) Automatic
DC Input Voltage: 12V DC at 3.0 A Max.
Power Adapter: 100-240v - 50-60Hz AC Input


Indicator Lights/LED

Power, Ethernet, USB, Voice Status, Phone 1,2,3,4,5,6,7,8


Documentation

Quick Installation, User, and Configuration Guides are downloaded from www.Linksys.com
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only


Environmental

Dimensions
6.69 x 1.54 x 8.66 (170 x 39 x 220 mm) W x H x D
Weight
2.85 lbs (1.30 kg)
Operating Temp.
32 to 113F (0C to 45C)
Storage Temp.
-13 to 185F (-20C to 85Operating Humidity 10% to 90% Non-Condensing, operating and non-operating
Storage Humidity
10% to 90% Non-Condensing, operating and non-operating

Write Your Own Review

You're reviewing: Linksys SPA8000-G1 - 8 FXS PORTS - Unlocked (SPA8000-G1) New