Toll Free: 866.987.VOIP
Cart Subtotal: $0.00

Patton Micro Analog Telephone or Fax Adapter; 1x FXS RJ11; 1x 10/100BaseTX, SIP, incl. ext. PS (M-ATA-1A/EUI) New

SKU: M-ATA-1A/EUI-NEW

Be the first to review this product

Availability: In stock

$70.00
OR

Quick Overview

Patton M-ATA Micro VoIP Adapter
1 FXS + 1 Ethernet
Protocol: SIP

Click images to enlarge

Condition: New

Patton Smartlink M-ATA VoIP Adapter
1 FXS Port + 1 Ethernet Port
Protocols: SIP, MGCP


Product Description


The SmartLink Micro VoIP Adapter provides connectivity for analog phones and faxes to a home, home office or corporate LAN. Connecting to any analog phone, fax or PBX, the SmartLink product is ay cost effective solution for small offices and telecommuters to access Internet-based telephone services and corporate intranet systems across established LAN and Internet connections like xDSL and cable modems.

The M-ATA provides one Ethernet (RJ-45) port and one FXS (RJ-11) analog phone port for quick and easy interconnection to the local LAN. LEDs show at-a-glance the status of the system, LAN, WAN, and phone ports.

A full suite of IP features (DHCP, NAT/PAT) are available to maximize universal connectivity. VLAN tagging and prioritization enables voice traffic to be handled before data traffic insuring higher quality voice calls. Support for PPPoE tunneling simplifies extending corporate intranet services to telecommuters.

The user friendly web interface offers two levels of configuration; level one covers basic subscriber specific parameters, level two offers advanced settings for the transport network. Configuration and firmware can be downloaded from a centralized TFTP or HTTP server.

The M-ATA is SIP and MGCP standard compliant. Analog phones attached to the SmartLink can use advanced calling features such as call forwarding, caller ID, 3-way calling, call holding, call retrieval and call transfer.


Typical applications

Patton's Micro Analog Telephone Adapter provides seamless access to Internet telephony and data services. The M-ATA connects to any broadband access provider via a cable or xDSL modem.


Product Specifications

Voice Connectivity 2-wire Loopstart, RJ-11/12

Short haul loop 1.1 km @3REN

Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation

Connectivity 1 10/100Base-TX Full Duplex/Autosensing Ethernet RJ-45
Voice Processing (signalling dependent) SIP

MGCP

  • Packet Cable NCS 1.0
  • IETF MGCP 1.0

Voice CODECS

  • G.711 A-Law/-Law (64 kbps)
  • G.726 (ADPCM 40, 32, 24, 16 kbps)
  • G.723.1 (5.3 or 6.3 kbps)
  • G.729ab (8 kbps)

G.168 echo cancellation

2 parallel voice connections

DTMF detection and generation

Carrier tone detection and generation

Silence suppression and comfort noise

Configurable dejitter buffer

DTMF in-band & out-of-band

Configurable transmit packet length

RTP/RTCP (RFC 1889)

STUN

Fax and Modem Support G.711 transparent FAX

T.38 Fax relay (9.6 k, 14.4 k)

Voice Services/Features Anonymous CallerID block

Call blocking

Call forward - on busy

Call forward - selective

Call forward - unconditional

Call hold/retrieve

Call return

Call transfer - blind

Call transfer - with consultation

Call waiting/retrieval

Caller-ID

Conference drop

Conferencing (3-way calling)

Distinctive ring

Do not disturb

Hotline calling

Incoming CallerID on/off

IP URL dialing

Message waiting indication

Self-caller ID block

Speed dial

Voicemail message retrieval

Warmline calling

IP Services NAPT

DHCP client

PPPoE

Programmable static routes

ICMP redirect (RFC 792); Packet fragmentation

VLAN support 802.1p/q

Management Browser configuration interface

Multilevel security access

TFTP & HTTP configuration & firmware loading

SNMP v2 agent (MIB II and private MIB)

Syslog support

Operating Environment Operating temperature: 0-40C (32104F)

Operating humidity: 5-80% (non condensing) )

System Power: 100-240 VAC (50/60 Hz)
Compliance EMC compliance: EN55022 and EN55024

Safety compliance: EN 50950

CE compliance

FCC Part 15 Class B

Physical Dimensions: 3.6L x 2.1W x 0.78H in. (9.0L x 5.3W x 1.9H cm)

Weight: 0.2 lbs (0.09 kg)

Write Your Own Review

You're reviewing: Patton Micro Analog Telephone or Fax Adapter; 1x FXS RJ11; 1x 10/100BaseTX, SIP, incl. ext. PS (M-ATA-1A/EUI) New